Trinks Inc.

Automotive Industry

Trinks Inc. compression and transfer presses are used to produce a wide variety of parts for the automotive industry. Some examples of automotive parts produced on the Trinks Inc. presses include Phenolic brake pistons, body panels, seals, transmission control modules, valve covers, and fuel cell plates. Press sizes range from 30 tons up to 3000 tons. Our larger presses can be equipped with leveling systems. Our 700 ton Advanced paraguide press was designed and built specifically for molding fuel cell plates. The press is built with a very high degree of parallelism, minimum deflection, and ultra high speeds that are required for molding fuel cell plates.

Click any of the images below to view a larger screenshot.

300 Ton Down-Acting Compression Press
450 Ton Down-Acting Compression Press
500 Ton Down-Acting Compression Press
1000 Ton Compression Fuel Cell Plate Press
120 Ton Press with 12 Multi-Plungers
75 Ton Up-Acting Slab Side Press
120 Ton Up-Acting Compression Press
450 Ton Vacuum Press with Automation
500 Ton Down-Acting SMC Press
700 Ton Down-Acting Compression Press
500 Ton Up-Acting Compression Press